A10/J/A – SRC 3P panel

Click to view Data Sheet:- A10 Panel

3 phase pre-wired lighting control panel housed within a 400mm High x 400mm Wide x 150mm Deep + projections sheet steel enclosure – Textured paint finished RAL 7035 Light grey. Fitted with two number 8mm triangular bit locks. Gland-plate 244mm x 89.5mm x 2mm thick, 5 x M25, 1 x M20 pre-punched gland entries.

Interior incorporating:-
Current – 100 Amps
Isolation – Door interlocked 100 Amps Isolator
Main Protection – 3No. of 63Amps Fuse Links
Switching – 63Amp 4P AC1 Contactor 230Volt coil.
Control – 1 Part Cell wired to terminals (3Wire).
Override – None.
Test – Push button to Timer.
Number of ways – 2 x 24HR Type C MCB’s + 7 Switched Type C MCB’s
Heater – PTC Heating plate 100-24VAC – 15Watt.
Earth Bar – Brass Earth Bar 12 way single 12+2, and Brass Neutral Bar 12 way single 12+2
Incoming tails –  Live and Neutral 25mmsq Double insulated 6181Y cable and Earth 16mmsq green/yellow 6491X cable.